Round Carbide Cutters

• Made with fine particle micro carbide to provide a sharp edge for woodturning
• Two styles: Scraper and Shear
  •  6 mm
  • 10 mm
  • The larger the cutter the more aggressive the cut can be made; note, more vibration may occur with the more aggressive cut
• Scraper Cutters
  • designed for more aggressive cuts
  • designed with a 3 degree inside angle to achieve a sharper edge than a straight flat scraper
  • TMI cutter holder is matched for this style
  • A 6mm Scraper Cutter and Holder is included with the Hollow Fast System
• Shear Cutters
  • designed for very smooth cutting
  • cut on an angled "shear" like a knife or gouge
  • very precise and very sharp

Cutter Holders

• holds carbide cutter securely in place at either a fixed or adjustable angle

• Three styles: 0 deg Square Shank, 30 deg Square Shank, and 1/4" Round Shank
• 0 deg Square Shank Cutter Holder
  • sets 3 deg incline
  • matches Scraper Cutter
  • gives horizontal cutting surface to the wood
• 30 deg Square Shank Cutter Holder
  • set 3/16 deg
  • matches Shear Cutter
  • square shank with a fixed angle (no guessing!)
• 1/4" Round Shank Cutter Holder
  • for 6mm and 10mm cutters
  • set any cutting angle with this indexing holder
  • use with Shear Cutter

Swivel Holder Clamps

• Secures cutter holder to Hollow Fast Articulating Arm System.

• Three styles: Round, Square, and Combination
• Round Shank Clamp
  • 1/4"
  • provides rotational indexing
• Square Shank Clamp
  • 3/16" high
  • provides fixed angle at 0 or 30 deg
• Combination of Round and Square